English | Deutsch ||
Delivery Destination:
|| Help

Clutch Release Bearing Guide Sleeve for Volvo 850, C70, S70, V70, V70XC

06.11.2026

When replacing a clutch, the pressure plate, drive disc, and release bearing are typically replaced; occasionally, replacing the pilot bearing is also recommended, if present.

However, depending on how the vehicle has been driven and its mileage, these are by no means the only wear parts in the clutch. Volvo drivers have long been aware of the release lever, which, after high mileage, often rubs through at its pivot point or tears into the release bearing. But the release lever’s bearing—a plastic ball socket—also tends to wear out, as does the release bearing’s guide sleeve.

These issues do not occur at low mileage, especially not if the clutch has been treated with care. However, the Volvo 850 or S/V70 often reach very high mileage, at which point the guide sleeve of the release bearing may have worn through.

Without the guide sleeve, this clutch will not function; the release bearing would grind against the input shaft and stick. A worn-out guide sleeve manifests as a clutch that catches and makes loud, unpleasant noises when engaged. Furthermore, the release bearing usually won’t last much longer in this condition.

For the Volvo 850 and early V70 or S70 models, this guide sleeve has recently become unavailable from the vehicle manufacturer. We reacted quickly and commissioned a reproduction.

The guide sleeves are now available in the shop under part number 1112244.

Compatible with the following vehicles with manual transmissions:

  • Volvo 850: all models
  • Volvo C70 (pre-2005): all models
  • Volvo S70, V70, V70XC (pre-2000): all models

Additional information...