SKANDIX - Your quality choice in VOLVO and SAAB car parts

Product attributes:

additional info:

For flushing passenger car diesel particulate filters (DPF/FAP) after cleaning with Pro-Line Diesel Particulate Filter Cleaner while installed. Rinses off the soot loosened by the cleaner and distributes it throughout the diesel particulate filter so that it can be burned off during normal regeneration. The cleaner is neutralized by the flushing. Regular cleaning in combination with flushing can prevent expensive repairs.

Application
Cleaning is carried out using the DPF pressure cup gun (item 1103425) and the specially developed DPF probe with 5 spray probes (item 1103426).

Note: The temperature of the particulate filter should be below 40°C during cleaning. For safety reasons, extreme caution must be exercised during cleaning to ensure that no cleaning or flushing fluid enters the combustion chamber via an open exhaust valve.

Spray the entire amount of Pro-Line Diesel Particulate Filter Cleaner (item 1103423 / 1 l) directly onto the surface of the particulate filter at several intervals of 5-10 seconds, with a 5-10 second pause between each spray, at an operating pressure of 6-8 bar. To ensure optimal coverage of the entire surface, rotate and move the sensor back and forth during cleaning. Allow the cleaner to work for approximately 15 minutes. Then rinse the particulate filter with the entire amount of Pro-Line Diesel Particulate Filter Flush (item 1103424 / 500 ml). This is also done with the DPF pressure cup gun at the same intervals as for the cleaning fluid. Cleaning loosens and distributes the soot in the particulate filter to such an extent that it can be burned off during normal regeneration. After reinstalling the sensor, the service center or workshop must initiate regeneration according to the manufacturer's specifications.

Other Information
Caution: After use, depressurize the pressure vessel and completely empty it. The gun must not be stored with material in the container.

applicable for:

required Accessories:

ⓘYou should have these parts ready to perform the assembly.

	Product No Reference	Description	Price EUR	available
	1103425	Spray bottle Pressure Cup Spray Gun for Diesel particulate filters 1000 ml universal ohne Classic fits Part No.: 1103423 fits Part No.: 1103424 fits Part No.: 1103426 Liqui Moly	163,21
	1103426	Spray bottle Spray probe for Diesel particulate filters universal ohne Classic Length: 300 mm fits Part No.: 1103423 fits Part No.: 1103424 fits Part No.: 1103425 Liqui Moly	58,31
	1103423	Additive, Soot-/ Particle Filter System cleaning Pro-Line universal ohne Classic Fuel type: Diesel Package type: Can Contents: 1000 ml Supplementary Info: Please note additional info! Liqui Moly	55,51 100 ml = 5,55