Tool for changing the transmission fluid in a Volvo TF80
08.05.2026
For the TF80SC and SD automatic transmissions, the inlet port of the transmission oil cooler on the transmission can be used as a drain port when changing the transmission fluid. The vehicle manufacturer’s tool 9997363 is available for connecting to the transmission via a quick-release coupling. It is essentially just a hose that can be quickly connected to the transmission as a drain using the appropriate connector. This drain hose can then be conveniently placed in a container.
The fact that this hose is transparent is intentional: After refilling the oil, the transmission is bled with the engine running and by shifting through the gears. If air bubbles become visible while shifting, oil must be refilled again. This way, you can also perform an oil flush if necessary, but this requires significantly more than the actual fill quantity. Usually three to four times as much, to really flush the contaminants out of the transmission.
To open the necessary screws and caps, you will also need the tools 1025604, 1106849 and 1106850 are still required to open the necessary screws and caps, as well as sufficiently large collection containers, of course.
We have been manufacturing the transmission oil change tool 9997363 in-house for some time now. It is now available in our shop under the number 1024998.
Suitable for the following vehicle models:
- Volvo C30: with TF-80SC transmission
- Volvo C70 (2006-): with TF-80SC transmission
- Volvo S40, V50 (2004-): with TF-80SC transmission
- Volvo S60, V60 (2011-2018): with TF-80SC, TF-80SCAWD, TF-80SD, TF-80SDAWD transmissions
- Volvo V70, XC70 (2008-): with TF-80SC, TF-80SCAWD, TF-80SD, TF-80SDAWD
- Volvo XC60 (-2017): with TF-80SCAWD, TF-80SC, TF-80SD, TF-80SDAWD transmissions
- Volvo XC70 (2001-2007): with TF-80SCAWD transmission
- Volvo XC90 (-2014): with TF-80SC, TF-80SCAWD transmission
Reference:
9997363
