Stabilizer Front axle for Volvo 850, S70, C70 and V70 l
28.02.2025
In recent years, the thicker stabilizers for the more powerful Volvo 850, S70, C70 and V70 l have become scarce.
The vehicle manufacturer has not been supplying any for some time, and the aftermarket trade has not been supplying any in the original specification. In the case of used parts, the condition after more than 25 years is usually not great, often they are rusty and fatigued. Parts that are severely rusty tend to break, but this is very rare. Usually they are then “only” soft, which leads to increased side tilt as well as less driving comfort and safety in curves.
Some time ago, we were able to win over a renowned German manufacturer for the reproduction of these stabilizers. This manufacturer was flexible enough to also produce an affordable small series for us; many other manufacturers often do not even respond to inquiries with quantities in the double-digit range.
The stabilizers are made according to original samples and can replace the original part without registration. The manufacturing quality corresponds to the original part, they are supplied with rubber bushings and clamps.
The stabilizers are of course also suitable for helping 850 or V70 with weaker engines to lean less in curves.
The new stabilizers are now available in our shop under the numbers 1014728 and 1014729.
Diameter 21 mm
Item No.: 1014728
Reference: 9173983
Diameter: 21.5 mm
Part No.: 1014729
Reference: 9173471
Suitable for the following vehicles:
- Volvo 850: all models
- Volvo C70 (before 2005): all models
- Volvo S70, V70, V70XC (before 2000): all models
