Repair kit Petrol vapor extraction for Volvo 850, C70 (-05), S40 (-04), S70, V40 (-04), V70 and V70XC
01.12.2023
A repair kit for the petrol vapour extraction line of many Volvo 850, S/V40 as well as S/V/C70 and V70XC with turbo engines is available.
For many of these cars, the line from the charcoal canister to the intake manifold was only available complete from the vehicle manufacturer. Volvo probably wanted to make sure that the check valves were always installed the right way round. The direction of installation is important for turbo engines because there can be both negative and positive pressure in the intake manifold. The check valves are necessary so that the boost pressure is not forced into the activated carbon filter and the petrol vapour from the tank ventilation is only extracted in the partial load range or when the throttle is released.
If the line is defective, it can lead to various unpleasant symptoms, from the smell of petrol in the engine compartment to confused engine control due to bypass air and loss of boost pressure. The latter, of course, lead to loss of power, idling problems and errors in the fault memory.
Unfortunately, these lines have been dropped by the vehicle manufacturer without replacement. That's why we've put some thought into this and put together all the parts needed for these lines in one set.
So that your turbo Volvo does not smell unpleasant or run bumpily and has its full performance, the repair kits for the petrol vapour extraction are now available in our shop under the number 1088999.
Fits the following vehicles:
- Volvo 850: model from 1995, engine B5254T, B5204T2
- Volvo C70 (-2005): Model up to 1998, engine all petrol with turbo 5 cylinder 4 valve
- Volvo S40, V40 (-2004): all models, engine all petrol with turbo
- Volvo S70, V70, V70XC (-2000): Model until 1998, engine all petrol with turbo 5 cylinders
References:
30620590, 9445436, 30850925
