5.5-inch wide rims for Volvo P1800E/ES, 140, 164 - now also in slotted design
19.08.2019You probably still know the original rim design with the narrow slots, which was used on the Volvo PV, Amazon and P1800 up to the 1964 model year.
SKANDIX has now had 5.5-inch wide rims made in the old "slotted" look for the first time.
In contrast to the Crown Prince rims, the slotted rims have a step in the rim bed so that rim trim rings can be fitted.
The rims measure 15 x 5.5 inches with offset 25, bolt circle 5x108. They fit all Volvo P1800E, P1800ES, 140 and 164 and the maximum possible tyre size is 205/60R15.
- Fits Volvo P1800E, P1800ES, 140, 164.
- Black primed, can be painted in car colour like the original rims.
- With safety hump for mounting tubeless tyres.
- The valve hole diameter has the standard dimension of 11.3 mm.
- Many popular tyre sizes possible, e.g. 205/60, 195/60, 185/65.
Overview vehicle models
In the following overview you will find the matching article allocations for the individual vehicle models.
Steel rim "Kronprinz" 5.5x15 ET25 |
Steel rim "Schlitz-Design" 5.5x15 ET25 |
|
---|---|---|
P1800E P1800ES 140 164 |
1029080 |
1056401 |
Rims for the models with "old" bolt circle (Volvo PV, Amazon, P1800 Jensen and P1800S) can be found in this separate report.
Rim steel 5.5x15 ET25 in "slotted design" (1056401)
In the following overview you will find different design variants compared. Simply click on a picture to take a closer look at the variant and on the respective item number to call it up in the shop.
You can add a complete vehicle set of the desired variant to your shopping cart by clicking on the Buy button.
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
||||||||||
|
*Wheel cap segmented no longer available
Rim steel 5,5x15 ET25 in "crown prince design" (1029080)
In the following overview you will find different design variants compared. Simply click on a picture to take a closer look at the variant and on the respective item number to call it up in the shop.
You can place a complete vehicle set of the desired variant in the shopping cart by clicking on the buy button.
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
||||||||
|
*Wheel cap segmented no longer available
As an alternative to the commonly used hub caps, the original, large hub caps also fit SKANDIX rims.
On the newly manufactured rims (SKANDIX 1029080 and 1056401), the hub bore is circular, as is common today. Therefore only the hub caps SKANDIX 1068591 are suitable.
The tightening torque of the wheel nuts specified by the vehicle manufacturer must be adhered to, a follow-up check must be carried out as usual.