Wiper Arm, Windscreen
Volvo 200
23.11.2021Replacing the wiper arms requires an accurate procedure. Here we show how to achieve a professional result.
Removin the wiper arm.
Folf up the cap.
And pull it off sidewards.
Loosen the nut using a number 13 wrench.
Remove the nut and save it aside.
Fold up the wiper arm and turn it carefully left and ...
... right until it becomes loose.
If it does not work use a wiper arm puller.
Pull off the arm.
Release the hinge.
ATTENTION: injury hazard!
Use a cloth to prevent your fingers from getting trapped in the hinge.
Released hinge.
Next step is the wiper balde. First unlock the clip.
Then push the blide out off the bracket.
Now blade and arm are separated.
Remove the cap from the new arm.
Install the wiper blade.
Tension the hinge. Remember to use the cloth to save your fingers.
Push the new arm onto the shaft.
Loosely srew the nut on the shaft.
Fold the wiper arm down carefully and align it to the window.
Now tighten the nut.
Put the cap in place.
FINISHED!
- All notes serve only as an example and do not replace the workshop instructions of the automobile manufacturers! All information is supplied without guarantee!