Isofix retrofit at the backseat
Volvo S60 (-09), S80 (-06), V70 (P26), V70XC (XC70), XC90 (-14)
27.12.2023The Isofix retrofit on the rear seat bench is completed in just a few steps. We have retrofitted the rear left bracket on a Volvo V70II (P26). The procedure is the same on the right side.
Fold up the seat cusion.
Pull the insulation mat out from under the sill cover and fold it aside.
There are cables harnesses below the insulatuion mat. Tape them to the floor to prevent contact with the Isofix-Bracket.
There is a pre-punshed hole inside the insulatiom mat which covers a stud.
Undo the belt lock mounting screw.
Place the Isofix bracket.
The kit includes a new longer screw. Mount the Isofix bracket and the belt lock together with the new screw.
On the other side the Isofix bracket is mounted to the stud using the new supplied nut. Because the nut is self-locking crimped, tightening is relatively difficult.
Fold down the seat cushion.
We recommend to use a cover which is simply pressed on the ISOFIX brackets and speads the upholstery to make the brackets reachable. They also prevent the upholstery from being damaged when the child seat engages.
This is the 1-parted version, Skandix 1028109.
We recommend to use a cover which is simply pressed on the ISOFIX brackets and speads the upholstery to make the brackets reachable. They also prevent the upholstery from being damaged when the child seat engages.
This is the 2-parted version, Skandix 1048318.
Fit the children seat according to the manufacturer`s instructions.
Pleasant and safe journey!
- All notes serve only as an example and do not replace the workshop instructions of the automobile manufacturers! All information is supplied without guarantee!