Inner Fender, Front
Volvo 164
23.11.2021Retrofitting front inner fender panels at the Volvo 164.
Mount the bracket, here you can see the left side.
Put in the inner fender and screw it to the bracket.
In the wheel arch the fender plate is screwed directly to the chassis. First drill the holes.
All other screws are also fixed into the chassis. remind to pre-drill all holes.
To optimize rust prevention it´s recommended to clean the chassis in advance, to drip the screws in cavity preservation wax and to seal them later with underbody protection.
- All notes serve only as an example and do not replace the workshop instructions of the automobile manufacturers! All information is supplied without guarantee!