English | Deutsch ||
Delivery Destination:
|| Help

Forged piston

04.08.2023

Attention!

  • The diameter does not always refer to the original diameters of oversize pistons. There maybe small differences!
  • The cylinder bore always complies with the diameter of the utilized piston.
  • The measures are printed on the piston base.
  • piston clearance: 0,10mm
  • Always make sure that the circlips holding the piston bolt are fit perfectly.
  • All notes serve only as an example and do not replace the workshop instructions of the automobile manufacturers! All information is supplied without guarantee!