SKANDIX - Your quality choice in VOLVO and SAAB car parts

Product attributes:

additional info:

Camshaft with "Penta" Profile for Volvo Penta Marine engines which correspond to the B18 and B20 Car engines.

Service instructions:

The following assemblies must be removed from the engine to replace the camshaft:
- Cylinder head, in order to remove the pushrods and valve lifters.
- Front engine cover.
- Timing gears.
- Fuel pump on carburetor vehicles.

These basics must be considered during the installation of a new camshaft:
- The valve lifters must be replaced
- The cams and the valve lifters must be lubricated with mounting paste, item no. 1014853.

Volvo once gave a tightening torque of the camshaft nut of 13 to 15 kpm. When installing the threaded end could be stripped. A maximum torque of 80 Nm should not be exceeded. For additional security Loctite should be used.


Tips:
- When dismantling the front engine cover, the oil pan seal in this area is almost always damaged. A repair piece can be cut out of a new gasket. Order a new oil pan gasket (Skandix 1000179).

- At this opportunity, convert to a front cover with rubber radial shaft seal (Skandix 1067877).

- Inspect the camshaft bearings in the block. The first bearing is frequently worn out. This can also be replaced without removing the engine from the car.

applicable for:

recommended Accessories:

ⓘThese parts can be purchased additionally if required.

	Product No Reference	Description	Price EUR	available
	1067877 418269	Timing cover with Oilseal Volvo 120, 130, 220, 140, 200, P1800, P1800ES, PV, P210 Part type: Conversion kit Part type: New part R-Sport		discontinued
	1000179 1378864	Gasket, Oil pan Volvo 120, 130, 220, 140, 200, 300, 700, 900, P1800, P1800ES, PV, P210 Type: Gasket Type: single part Position: Crankcase - Oil pan	24,70
	1007764 1218674	Camshaft Penta Volvo universal Classic Supplementary Info: Please note the Service instructions! EPC USA	265,00
	1000132 1218630	Valve lifter Volvo 120, 130, 220, 140, 164, 200, P1800, P1800ES, PV Valve control: for vehicles with mechanic Tappets Supplementary Info: Please note the Service instructions!	10,68
	1014853	Assembly and Run in Paste Camshaft Engine universal Contents: 50 g Package type: Tube Liqui Moly	12,68 100 g = 25,36
	1018615	Screw locking 10 g Medium Solidity universal Package type: Bottle Liqui Moly	6,02 100 g = 60,20

Technical Documents:

• Additional information: Video - Engine overhaul B18/B20 - Camshaft installation