English | Deutsch ||
Delivery Destination:
|| Help

M90 conversion kit from dual mass to solid flywheel

Volvo 900

09.12.2021

The dual mass flywheel is not longer available. This conversion kit includes all necessary parts to replace it by a solid flywheel.


Detach the old clutch.


Srews to remove.


... there it is.


Now you can see the old dual mass flywheel.


Ensure the engine is still turned to TDC.


Before the flywheel can be removed it´s mandatory to mark it´s position. The reference point is the lower edge of the engine block.


Detach and remove the flywheel.


Check the crank shaft´s radial oils seal for leakages. Also inspect the joint surface, it should be clean and flat.


Transfer the mark to the new flywheel. No need to be specific to the millimeter.


Atention! Check if the adapter and it´s bearing exactly fit on the transmission shaft.


Insert the adapter into the flywheel, the bearing facing the clutch.


Prepare the new screws with some screw retention.


Attach the new flywheel...


... and align hte marks.


If the mark has been transferred properly, the screws will fit excatly.


Pre-tighten the screws crosswise.


Tighten the screws crosswise to the specified torque of 70 Nm. Counter the flywheel using an adequate tool or the Volvo tool 1028562.


Attention: degrease the clutch pressure plate!


Attention: degrease the flywheel.


Attach the new clutch using a centring pin, for example 1044140.


Now fix it using the the new screws from the kit. First carefully crosswise pre-tightened. Then tighten them to the specific torque of 15 Nm.


Assemble the new clutch fork and the new counter bearing from the kit.


Assemble the new release bearing from the kit. The sleeve the bearing is running on has to be clean and free of grease. Clutch grease should only be applied to the shaft gearing.


Assemble gear box, slave cylinder and prop shaft in the reverse order.


Finished!

1 2 Next >
(50 Entries)
  • All notes serve only as an example and do not replace the workshop instructions of the automobile manufacturers! All information is supplied without guarantee!

Additional information...